In 1908, the first RegO® Products were designed for the gas welding industry. The name RegO® was derived from the words “Regulator” and “Oxygen”. In 1923, the RegO® line was established in the young, but promising, LP-Gas industry. RegO® Product engineers, in conjunction with LP-Gas marketers, pioneered the development of propane valves and regulators to meet the needs of the rapidly growing industry. The RegO® MultiValve illustrates our tradition of innovation. In the 1930s, the MultiValve® was designed to combine several valve functions in one unit. This made more practical tank designs possible – with fewer openings and smaller, less cumbersome protective hoods. Over the years, the MultiValve® has kept pace with the changing LP-Gas industry – continuing to keep tank fabricating cost down and reducing operating expenses for LP-Gas dealers. Other industry standards patented under the RegO® name include: Double Check Fill Valves, Pop Action Relief Valves, Chek-Lok Valves and the MultiBonnet.
Multiport Pressure Relief Valve
Designed especially for use as a primary relief device on large stationary pressurized storage containers with flanged openings. These manifolds incorporate an additional relief valve, not included in the flow rating, allowing for servicing or replacement of any one of the relief valves without evacuating the container. The handwheel on the manifold selectively closes off the entrance port to the relief valve being removed while the remaining relief valves provide protection for the container and its contents. All manifold flow ratings are based on flow through the relief valves after one has been removed for service or replacement.