Series 700 Safety Valves
ASME SECTION VIII FOR AIR-GAS-STEAM OR LIQUID SERVICE
Series 740 safety and relief valve is designed for accuracy and reliability. Engineered for heavy-duty industrial usage. Multiple purpose pressure relief valve for all services: Liquid, Steam and Air/Gas. ASME and National Board Certified for Section VIII service as well as CE and CRN certifications. Pressures are to 1500 PSI. Available with a full array of metal seating options.
Series 740
Brass, bronze construction with stainless steel ring, disk and springs. ASME Section VIII to 300 PSI for air/gas and liquid and 250 PSI for steam services.
Series 741
Stainless steel nozzle, ring, disk and springs. Bronze bonnet, and body. ASME Section VIII to 1500 PSI for air/gas and liquid, 300 PSI for Steam.
Series 742
Stainless steel nozzle, ring, disk and springs. Carbon steel body and bonnet. Ratings same as 741. Used as an all steel option.
Series 743
Same as 742, with stainless steel bonnet, body and components. Used where a stainless steel valve is required.
Usages:
Pressure Vessels, Pumps, Hydraulics, Tanks, Steam Systems, Chemical, Cryogenic, Air and Gas Compressors, Separators, by-pass and over pressure protection. Choose for most industrial applications requiring a safety relief valve.
Features:
- Full nozzle – top guided design
- Short, precise blow-down
- Wide choice of inlet/outlet sizes
- Excellent re-seating characteristics
- Designed for heavy industrial use
- Closed hex cap
- Back pressure tight
- Drain hole with threaded plug
- Cryogenic Compatible
Options:
- Lap Joint Flanges
- O-ring seating options (see charts)
- Packed lift lever
- Open lift lever
- BSPT piping
- Tri-Clamp inlets
- Full array of metal options
- O2 Cleaning
- API 527 Seating
Series 560/570 Safety Valves
ASME SECTION I and SECTION VIII FOR AIR-GAS-STEAM SERVICE
The 560 / 570 valve line is a high capacity safety valve used for boilers, piping lines and vessel protection. Designed and engineered for heavy-duty industrial use. ASME and National Board certified for Section I and VIII as well as CE and CRN Certifications.
Series 560
Use for ASME Section I applications to pressure ratings of 250 PSI. {V} and {NB} stamped for fired vessels. Boilers, or most areas where steam safety valves are required.
Series 563
Same as Series 560 except with Stainless Steel wetted trimming (Nozzle and disk).
Series 570
Use for ASME Section VIII applications to pressure ratings of 300 PSI. {UV} and {NB} stamped for unfired vessel protection. Used for many applications to protect or relieve pressure for Air, Gas or Steam.
Series 573
Same as Series 570 except with Stainless Steel wetted trimming (Nozzle and disk).
Usages:
Steam Boilers, Air Compressors, Dryers, Receivers, Pressure Vessels, Piping Systems, Accumulators, Reducing Stations, Tanks, Inter/After Coolers, Cooking Equipment, Autoclaves, Sterilizers or wherever higher capacity pressure protection or relief may be required.
Features:
- Designed for durability
- 6 orifices – 12 sizes of piping options
- Top guided seating and discharge
- Full nozzle; high capacity levels
- Excellent re-seating characteristics with ball-post pivoting design
- Short, tuned blow-down with dual-ring technology
- Heavy duty hood and lever mechanism
- Standard 17-7 stainless steel springs
Options:
- O-ring seating options (see charts)
- Packed lift lever
- Stainless steel trimming package nozzle (body), disk (all sizes)
- O-ring seating. (PTFE, EDPM, Viton, or as specified)
- Bubble tight seating options
- Anti vibrating spring for lift lever
- BSPT pipe threading
Aquatrol Series 560/570 Catalog
Series 88/89 Safety Valves
ASME SECTION VIII FOR AIR-GAS SERVICE
Series 88 / 89
Multiple purpose safety valves for air / gas protection. Designed for durability, yet an economical choice for safety and relief applications.ASME and National Board certified for Section VIII as well as CRN Certifications.
Choose for a variety of applications where mid-level capacity is required.
Series 88 / 89
Durable and economical choices for safety and relief applications.
Usages:
Over pressure protection, Pressure vessels, Piping systems, Tanks, Compressors, Dryers, Inter- and After-coolers.
Features:
- Precision lapped metal-to-metal seating
- Stainless steel springs
- Ruggedly constructed
- Closed seal hex cap or lever* option
- Wide variety of inlet and outlet options
- Disk-guided seat provides quick, accurate and excellent re-seating
Options:
- Stainless steel inserts (seat and disk)
- Stainless steel body and disk
- Chrome plating/polishing
- Oxygen cleaning
- Female inlet
- BSPT connections
Cryogenic:
- Standard with PTFE seating
- O2 cleaned and bagged
Series 69 Pressure Relief Valves
NON-CODE ADJUSTABLE LIQUID RELIEF VALVE, WATER RELIEF VALVE
Series 69 is an industry standard liquid relief valve used for pressure relief and by-pass.
Engineered and designed for heavy duty, industrial and commercial usages. A single piece bonnet to eliminate leakage while allowing for simple cleaning. Easy removable sealed hex-cap to adjust pressure.
Series 69
Series 69 Liquid Relief Valves are calibrated (set to pressure) based on a range of flow-rates (GPM) versus seat size and set pressure. Standard valve is set to pressure to achieve flow rate maximum and minimums within each set pressure range. See capacity chart for details.
New (WR) wide range adjustable and available in 150 PSI increments.
Liquid Relief Valve Model Choices:
Brass/bronze valve with stainless steel springs
Stainless steel body / disk and springs with bronze bonnet
Wide Range:
Series 69 is now available with a wider adjustable range (as an option). Valves are set to the mid-level pressure (or as specified). Typical wide-range is 150 PSI increments. Note: Flow rates are not showing on flow charts and vary by set pressure points.
Usages:
Include liquid by-pass, regulation, continuous pressure relief and over-protection. Also used on pumping stations, tanks, hydraulics, fluid / piping lines, oil fields, gas lines where a Liquid or Water Relief Valve is needed.
Features:
- Field adjustable by simple removal of the hex-cap
- Metal to metal precision lapped seating
- Back pressure tested at factory
- Ease of cleaning and maintenance with simple bonnet removal
- Stainless steel springs
- Single piece leak free bonnet
Options:
- BSPT connections
- Female Inlet
- Viton embedded o-ring at hex cap
- Packed lift lever
- Wide range WR adjustable (150 PSI increments)
- Stainless steel body, disk, and seating
- Low lead option (for a potable water relief valve)
- PTFE Seating
- Adjustable wheel handle
- BSPT connections
- Low lead option
- Tamper proof wire seal
Aquatrol Series 69/51-55 Catalog
Series 120 Safety Valves
ASME SECTION VIII FOR AIR-GAS and STEAM SERVICES
Series 120-126
Our Series 120, air / gas and steam pressure relief valve is designed for safety and pressure relief for light and medium capacity applications where a smaller sized valve is needed. The Series 120 valves have a higher capacity than our Series 130.
Many are manufactured to meet specific field and OEM applications. ASME and National Board certified for Section VIII as well as CRN Certifications.
Series 120-126
Essential for light- and medium-capacity situations where a smaller sized valve is needed. Not for use with liquid.
Usages:
High-quality Smaller Valves, Compressors, Receivers, Gas lines, Steam lines, Air and Gas receivers, Piping system/tanks, Steam cleaners, Sterilizers, Autoclaves
Features:
- Fixed blow-down
- Brass/bronze construction
- Metal-to-metal seating
- Rugged, yet economical
- Stainless steel springs
- Factory set and sealed
- Excellent seat tightness
Options:
- Stainless seat and disk
- Polishing and chrome plating
- Oxygen cleaning
- Variety of inlets/outlets and lift levers or pull ring
- Other configurations
Series 130 Safety Relief Valves
ASME SECTION VIII FOR AIR-GAS and STEAM SERVICES
Series 130-135
Our Series 130, air / gas and steam pressure relief valve is designed for safety and pressure relief for light and medium capacity applications where a smaller sized valve is needed. Many are manufactured to meet specific field and OEM applications.
ASME and National Board certified for Section VIII as well as CRN Certifications.
Series 130-135
Essential for lower capacity situations where a smaller sized valve is needed.
Usages:
High-quality Smaller Valves, Compressors, Receivers, Gas lines, Steam lines, Air and Gas receivers, Piping system/tanks, Steam cleaners, Sterilizers, Autoclaves
Features:
- Fixed blow-down
- Brass/bronze construction
- Metal-to-metal seating
- Rugged, yet economical
- Stainless steel springs
- Factory set and sealed
- Excellent seat tightness
Options:
- Stainless seat and disk
- Polishing and chrome plating
- Oxygen cleaning
- Variety of inlets/outlets and lift levers or pull ring
- Other configurations
Series 140 Safety Valves
ASME SECTION VIII FOR AIR-GAS
Series 140
Our Series 140 is engineered / designed for heavy duty use and where a smaller sized valve is needed. Excellent seating characteristics. Fast action reseating that minimizes loss of medium and saves energy. Built to withstand rugged industrial applications for air and inert gases. High capacity flow rates.
Usages:
Compressors, Receivers, Gas lines, Air and Gas receivers, Piping system/tanks
Features:
- Fixed blow-down
- Brass/bronze construction
- Metal-to-metal seating
- Rugged, yet economical
- Stainless steel springs
- Factory set and sealed
- Excellent seat tightness
Options:
- Stainless body
- NPT – BSPT
- Polishing and chrome plating
- Oxygen cleaning
- Lift lever or pull ring